Call Now — (407) 536-771724/7 mobile locksmith

How Rekeying a Lock Works Step by Step in Orlando

Technician rekeying a lock cylinder at a mobile workbench, showing how rekey locks Orlando service works step by step.

How Rekeying a Lock Works, Step by Step

Rekeying a lock means changing the internal pins inside the existing lock cylinder so the old key no longer works and a new key does. The lock itself stays on your door. For most homeowners looking to rekey locks Orlando wide, the whole process takes a locksmith only a few minutes per lock once the hardware is off the door.

Below is a plain-English walkthrough of exactly what happens during a rekey, why it is often a smarter choice than buying new hardware, and what to expect when you book a mobile locksmith in the Orlando metro.

What Rekeying Actually Changes Inside the Lock

Every pin tumbler lock, which is what sits inside most residential and commercial doors, uses a stack of small spring-loaded pins. When the correct key slides in, the cuts on the key push those pins to exactly the right height, letting the cylinder turn. The wrong key pushes them to the wrong heights, and the cylinder stays locked.

Rekeying swaps out those small pins for a new combination that matches a new key. The housing, the bolt, the strike plate, the handle, and the finish all stay the same. Only the inner pin stack changes.

Rekey vs. Lock Change

A rekey keeps your hardware and gives you a new key. A lock change replaces the entire lock body. Rekeying is usually the right call when your existing locks are in good condition and you simply want old keys to stop working. A full lock change in Orlando makes more sense when hardware is worn, damaged, outdated, or you want to upgrade the grade of security.

Step by Step: How a Locksmith Rekeys a Lock

Step 1: Confirm the Lock Is a Good Candidate

The technician first checks the brand and condition of the lock. Common residential brands like Kwikset, Schlage, Defiant, and Weiser are straightforward to rekey. High-security cylinders and older worn locks sometimes need different parts or a replacement. If the lock turns rough, has internal rust from Florida humidity, or the keyway is damaged, the tech will mention it before continuing.

Step 2: Remove the Lock From the Door

For a standard knob or deadbolt, the locksmith removes the screws on the interior side and pulls the lock apart. The exterior half, which holds the cylinder, is what matters for rekeying. Smart locks and lever sets follow similar steps with a few extra screws.

Step 3: Take the Cylinder Apart

Next, the technician removes the cylinder from the lock body. On most residential locks this involves sliding out a C-clip or retainer, then carefully separating the plug (the part that spins) from the shell (the outer housing). This is done over a tray so the tiny springs and pins do not fall and roll away.

Step 4: Remove the Old Pins

With the plug slid out, the old bottom pins drop out or get pushed out one chamber at a time. The top pins and springs stay in the shell, held in place with a special tool called a follower that the tech uses to replace the plug without losing anything.

Step 5: Cut the New Key

The locksmith cuts a brand-new key on a key machine right in the mobile van. The cut pattern, called a bitting, is chosen from a pinning chart so it is different from the old key. The goal is a key that is easy to insert, turns smoothly, and cannot be opened by the previous key.

Step 6: Match New Pins to the New Key

The technician reads the bitting of the new key and selects the matching bottom pins from a pin kit. Each pin is a specific length that corresponds to a cut depth on the key. The pins are loaded into the plug in the correct order.

Step 7: Reassemble the Cylinder

The new key is slid into the plug to hold the pins in place. The plug is then eased back into the shell, pushing the follower out the other side so the top pins and springs stay seated. The C-clip or retainer goes back on, and the cylinder is complete.

Step 8: Test Before Putting It Back on the Door

Before reinstalling, the locksmith tests the cylinder in hand, turning the new key multiple times. They also test the old key to confirm it no longer works. This quick bench test catches any pinning mistakes before the lock goes back on the door.

Step 9: Reinstall and Final Test

The lock is reassembled on the door, screws tightened to the right tension so the bolt throws smoothly. The technician then tests the new key from both sides, with the door open and closed, and checks alignment with the strike plate.

When Orlando Homeowners Should Think About Rekeying

Rekeying is often the right first call in situations like:

  • You just closed on a house in Dr. Phillips, Lake Nona, or Winter Park and have no idea how many copies of the old keys are floating around.
  • A roommate, tenant, contractor, or housekeeper moved on and had a key.
  • You lost a key somewhere between the parking lot at International Drive and your front door.
  • You want every exterior door, including the garage entry and side gate lock, to open with one single key.

Matching several locks to one key during the rekey is called keying alike, and it is one of the most popular requests for residential locksmith jobs across the metro.

Rekeying for Businesses and Rentals

Commercial rekeys follow the same mechanical steps, but the planning is different. Offices, retail suites, and short-term rentals in Celebration or Kissimmee often need different access levels for cleaners, managers, and owners. A locksmith can rekey existing hardware into a tiered system where certain keys open certain doors and a master key opens them all. If you want to design something like that, look into master key systems in Orlando or a full commercial locksmith plan.

What Changes the Cost of a Rekey

There is no one-size price for rekeying because several things move the number up or down:

  • Number of locks and whether they should all share one key.
  • Brand and type of lock, since some cylinders need more parts or more labor.
  • Condition of the hardware and whether any pieces need replacement.
  • Time of day, since after-hours and holiday calls are priced differently.
  • Location within the metro, from Sanford down to Hunters Creek.

For an exact quote, it is best to call and share the brand, how many locks, and the zip code. For a quick overview of the service itself, see the rekey locksmith Orlando page.

What to Have Ready Before the Technician Arrives

You do not need much, but a few things make the appointment smoother:

  1. At least one working key per lock, if possible. It speeds up the process, though a skilled tech can still rekey many locks without the original key.
  2. A clear path to each door being rekeyed. Move furniture, pet gates, or boxes in advance.
  3. A quick list of how many keys you want cut at the end.
  4. Any decisions already made about keying alike across multiple doors.

Frequently Asked Questions

Is rekeying as secure as buying new locks?

From a mechanical standpoint, a properly rekeyed lock is just as secure as it was the day it was installed, because the pin stack is fresh and the old key no longer works. If the hardware itself is worn or low grade, upgrading the lock is the better long-term move.

Can every lock be rekeyed?

Most standard pin tumbler locks can be rekeyed, including the common residential brands and many commercial cylinders. Some high-security, electronic, or heavily damaged locks are better replaced. A mobile locksmith can tell you on the spot.

How long does a rekey take?

Once the technician is at your door, each lock usually takes only a few minutes to rekey, plus key cutting and testing time. A typical house with three or four exterior locks is often finished in a single visit.

Can I keep using my old key by mistake after the rekey?

No. After a proper rekey, the old key will not turn the cylinder at all. The technician will demonstrate this in front of you before leaving.

A Plus Locksmith & Keys is a fully mobile, Insured, BBB A+ rated locksmith available 24/7 across Orange, Osceola, and Seminole counties, from Winter Garden and Ocoee to Lake Mary and Celebration. To schedule a rekey or ask a quick question about your hardware, reach out through the contact page.

A Plus Locksmith & Keys · 7345 West Sand Lake Rd Ste 219A, Orlando, FL 32819 · (407) 536-7717 · Open 24/7
📞 CALL NOW — (407) 536-7717